SIMPLE QUICK REMAPPER INSTRUCTIONS :
FIRST STEP is always to link around the diagnostic port beneath the steering wheel on the cars and then start key to switch on the ecu, but leave the engine off and select Tuning and then select the automobile that's the closest match to your car. Then Arrow over and it will say stock file missing, do you intend to read it now? You choose YES and it will begin reading out the OEM Stock File: DO NOT TOUCH ANYTHING AND LET IT COMPLETE THE READING PROCESS. THEN UNPLUG AND TURN KEY OFF AND WALK INTO THE HOUSE TO TRANSFER FILE:
SECOND STEP is always to download the Remapper Software from website, it can certainly be found by putting your cursor over product and you might find most of the listings of the instructions and the software. YOU MUST HAVE A GOOD WORKING INTERNET CONNECTION TO USE THE REMAPPER. When the REMAPPER SW is downloaded, then open it up and plug in the REMAPPER tool to the computer and it will identify the unit and update it.
IF IT SAYS CANNOT INITIALIZE DEVICE, JUST UNPLUG AND PLUG BACK IN THE DEVICE WHILE THE REMAPPER SW RUNS ON THE COMPUTER AND IT WILL EVENTUALLY IDENTIFY THE DEVICE AND START WORKING.
When the ecu remap finishes updating, then you can select download data, this will be your OEM file. It helps it be easier if you name your file, like John-08-V6-OEM. Save this file to your documents on your computer, not your desktop. Then you just upload the file to REMAPPER website. NOTE; YOU ONLY READ THE OEM FILE ONE TIME EVER, YOU NEVER READ IT A SECOND TIME ! Company will likely then modify and send back your tune and you'll open your email and save the file that sending back to your documents.
Then you open the REMAPPER mapping software again and link around your device. Now you select Upload Data. This may upload the new tune to the REMAPPER. Now you can walk to the automobile, link around the automobile and select tuning and choose the tune and program your car or truck!
Note: With windows 8, you must disable the signature driver enforcement when you download the REMAPPER SW. You will find countless links online to observe how to do this. You are able to just google search how to disable signature driver enforcement in windows 8 and they'll all pop-up for you personally many videos and instructions.
6 REASONS TO CHOOSE REMAPPER
- Optimum Performance
- Lower Fuel Consumption
- Lifetime Engine Protection Warranty
- Simple Self-installation
- 30 Day Money Back Guarantee
- zFree Shipping World Wide
Quantum Tuning – Chip Tuning | Engine Remapping | ECU Programming
The Quantum Remapper (Personal OBD Tuner) is an amazing device to reprogram your car, van, motorhome, tractor or motorbike.
The touch screen provides an intuitive step-by-step process to help you easily and confidently complete the remapping.
The simple steps to success are :
Connect the Remapper to the vehicles diagnostic socket and follow the on-screen instructions to read the original file
Download the Remapper software to your PC and then connect the Remapper to the PC via USB, in order download the original file from the Remapper
Use the ‘Tune my Vehicle’ function on this website to upload your original file to be modified
You will receive the tuned file into your email, which you can then use the Remapper software to upload to your Remapper
You then return to you vehicle, reconnect to the diagnostic socket and follow the on-screen instructions to write your tuned file
Take your tuned vehicle for a drive and try not to smile
The Remapper (ECU Flashing Tool) also has a Diagnostic function, which you can use to read and clear and DTC’s (diagnostic trouble codes) and we recommend you run this after programming.
Important – It is essential that your battery is in a good state of charge before programming – if in any doubt connect a charger. Please also ensure that headlights, interior lights, heater fan and radio is switched off.
